Introduction of various models of softened water equipment

Softened Water Treatment Equipment can be divided into various models, such as single-tank time type, single-tank flow type, double-tank flow type, etc., and the double-tank flow type can be divided into one-use-one-standby type and simultaneous operation and separate regeneration type to meet the needs of users. Different water needs. In this article, the editor will introduce various models of Ro System.

Introduction of various models of softened Ro Equipment

Single-tank time type: adopts microcomputer time control, the equipment will automatically enter the regeneration state after running to the set time, and can be regenerated once a day or once in multiple days.

Single-tank flow type: It adopts turbine flow control or electronic flow sensor control. When the water production of the equipment reaches the preset flow rate, it will automatically enter the regeneration state and can regenerate many times a day.

One-use-one-standby type: one Frp Softener Water Tank is running and the other is standby. When the water output from the first running Frp tank reaches the set flow rate, it enters the regeneration stage, and at the same time the other tank enters the working state, so that the two tanks work alternately for regeneration, and can supply water continuously for 24 hours.

Simultaneous operation and separate regeneration type: Two FRP Pressure Tank run at the same time. After the flow rate is reached, one regenerates first and the other continues to discharge water. The regenerated first enters the working state after the regeneration is completed, and the other enters the regeneration state. After both tanks are regenerated, they enter the simultaneous working state.

The above is the introduction of various models of softened water equipment. Generally speaking, these types of softened water equipment can be divided into two categories: flow type and time type. They are the same in function, but there are differences in the form of triggering the regeneration signal. The difference between them is reflected in the control system. The one with the impeller assembly at the water inlet and outlet is the flow-type softened water equipment.