What do you need to pay attention to when installing double tank softened water equipment ?

The double tank softened water equipment is mainly composed of two Resin tanks and a salt tank controlled by a control valve. A valve controls the two tanks and is equipped with two pistons, one to control the regeneration process and the other to switch between the two tanks and provide a continuous supply of softened water. What do you need to pay attention to when installing the can softening water equipment?

Note the following when installing the two-tank softened water device

1. The equipment needs a simple horizontal foundation, about 250 ~ 450mm away from the wall, which can be arranged near the corner according to the actual situation;



2. Because the equipment itself is light, generally only the weight of the resin and water installed in the equipment can be considered;



3. The inlet and outlet pipes are standard flanged or threaded connections, which need to be fixed and supported, and cannot be supported by the valve body to prevent stress;



4. Y-type filter and water pressure gauge should be installed on the water inlet pipe to prevent the dirt in the water inlet pipe from blocking the controller. When the equipment is running, the flushing water is discharged, and the floor drain or drainage ditch is set nearby;



5. The salt water tank should be as close as possible to the softening tank, and the shorter the brine pipe, the better;



6. The sewage pipe should not be longer than 6m, do not install the globe valve, the outlet should not be higher than the valve body, the terminal opening to avoid siphoning, the less elbow the better;



7. Install a power distribution socket on the wall near the device, which should be equipped with a fuse (generally do not install a switch), and be well grounded.



The above is the introduction of the matters that need to be paid attention to when installing the double tank softened water equipment. Under normal circumstances, the customer can produce 8 hours, choose a single valve single tank system can meet the use, and when the customer's water consumption needs 24 hours uninterrupted water supply, you need to configure a single valve double tank or double valve double tank softening water equipment.